Advertisement
Quick Links
Item#: W52FP18AV
Assembly Instructions
For the most current instructions, additional assembly tips, to report damage or request parts,
please visit our website at www.walkeredison.com.
Revised 04/2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
P.1
Advertisement
Related Manuals for Walker Edison W52FP18AV
Summary of Contents for Walker Edison W52FP18AV
- Page 1 Item#: W52FP18AV Assembly Instructions For the most current instructions, additional assembly tips, to report damage or request parts, please visit our website at www.walkeredison.com. Revised 04/2017 Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 5 Insert wooden dowel (A) into fireplace faceplate (9). Secure cam bolt (B) to fireplace faceplate (7,8) and top panel (1). Insert wooden dowel (A) into side panel (3,4,5,6).
- Page 6 Insert fireplace faceplate (7,8) into side panel (5,6), then insert and secure cam lock (C) to side panel (5,6) to lock it. Use wrench (R) to secure bottom panel (2) to side panel (3,4,5,6) with bolt (D).
- Page 7 Slide back panels (11) into grooves. Insert top panel (1) into side panels (3,4,5,6) and fireplace faceplate (9), then insert and secure cam lock (C) to side panels (3,4,5,6) and fireplace faceplate (9) to lock it. Insert leg (15) into support bar (16), then use wrench (R) to secure support bar (16) with washer (G) and bolt (F).
- Page 8 Use wrench (R) to secure leg (15) and support bar (16) to bottom panel (2) with washer (G) and bolt (E). Secure plastic wedges to back panel (11) with screw (K).
- Page 9 Place sticker (Q) over holes as per diagram. Insert shelf support pin (H) into side panel (3,4,5,6), place shelf (10) on top of shelf support pin (H).
- Page 10 Attach handle (N) to door (13,14) with bolt (P). Secure hinge (L) to door (13,14) with screw (M). Secure hinge (L) to door (13,14) to side panel (3,4) with screw (M).
- Page 11 Secure fireplace insert (U) with screw (T) as per diagram. Attach part (12) behind the fireplace unit by using cam bolts (B) and cam locks (C).
- Page 12 Place sticker (Q) over holes as per diagram.