Table of Contents
Advertisement
User Manual
Trouble Shooting
1
No Power
① Check whether the power cable is properly connected.
② Check the power supply.
③ Check the Emergency Button is pushed.
2
Incorrect Folding
① Check out the fold position of UCA / LCA is correct.
② Check the direction of paper on the LCT.
3
Power On, but No Start
① Check the "Mode" on the OP Display is "Ready" condition.
② Check out the Safety Covers (left & right) are closed.
③ Check out the LCA / UCA is closed.
④ Check out if there is a paper jam inside of the machine.
4
Frequent Double or Multiple Sheet Feeding
① Check the condition of Infeed Roller Set. Try to do clean them or exchange all three
rollers all at once if they are worn out.
② Check whether the adhesive on the sealer paper is too thick or strong.
③ If the paper is curled or the ink does not dry out after printing, the paper may not be
separated properly.
④ Power On or after changing the form, Press Thickness Button to re-calibration.
If the errors keep occurring, please contact the local dealer or service
company.
MX11500
25
Maintenance
Ver. 01
Advertisement
Table of Contents
