Table of Contents
Advertisement
User Manual
Functions
3
Thickness
The Thickness function detects the thickness of the paper through the light sensor
to prevent serious paper jams due to double or multiple feeding.
① Press the Thickness button, 1 sheet is fed to detect the thickness of the paper.
② When the double detection function is activated, the Thickness lamp is turned on
Pressing the button again will turn off the lamp and double detection will be disabled.
③ When the machine is detecting double feeding while using the function, the machine
will stop operating with the message "Double Feed".
Turn off and on the machine or change the paper type, be sure to reset
the paper thickness by pressing the Thickness button.
4
Manual Feed
Manually handling single sheet job for damaged paper & small amount of work.
① Holding down the Manual Feed button on OP Panel & locate the paper on paper exit.
② The paper enters to press roller for sealing and ejected.
③ Keep holding down the Manual Feed button on OP panel until operation is done.
Be careful not to get your hands caught in the press roller inside the
Machine while using Manual Feed Function.
MX11500
22
Operation
Ver. 01
Advertisement
Table of Contents
