Table of Contents
Advertisement
User Manual
Operation
1
Load the paper on the LCT.
2
Adjust the fold position of UCA / LCA as your desire fold type.
3
Press the Thickness button on the OP Panel to detect the thickness of the paper.
① The MX11500 has a light sensor to detect paper thickness & prevent double feeding.
When you press the Thickness button, a sheet of paper is fed and automatically
detects the paper thickness.
② When the double detection function is activated, the Thickness lamp is turned on
Pressing the button again will turn off the lamp and double detection will be disabled.
4
Press Start / Stop button for operation
① Operation will continue to run until finishing all of the paper loaded on the LCT.
(when Batch Count / Auto Start function is activated, it depends on the amount of count
setup )
② Press Start / Stop while operation, the machine stops.
If an emergency occurs during operation, press the emergency switch
on the front of the unit to stop the machine.
MX11500
20
Operation
Ver. 01
Advertisement
Table of Contents
