Instructions For Pressure Lid Assembly - Emeril Lagasse Pressure Air Fryer Plus Y6D-AF-36B Owner's Manual

Instructions for Pressure Lid Assembly

INNER LID ASSEMBLY
REMOVING LID
1. Hold the Knob on the underside of the Inner Lid and pull
to remove the Inner Lid (see Fig. i).
INSERTING INNER LID
1. Ensure that the Knob on the underside of the Inner Lid is facing
outward, away from the Lid.
2. Ensure that the Inner Lid Rubber Gaskets are properly attached
to the Inner Lid (see Fig. ii-a & ii-b).
3. Press the hole on the Inner Lid into the Center Knob on
the underside of the Lid (see Fig. iii).
4. Ensure that Knob is visible when the Inner Lid is in place and that
the Inner Lid Rubber Gaskets are positioned evenly and onto the
rim of the Inner Lid (see Fig. ii-a).
CHANGING OR CLEANING THE INNER LID
1. Hold the Inner Lid Knob on the underside of the Inner Lid
and pull to remove the Inner Lid (see Fig. i).
2. Pull off the Inner Lid Center Gasket (see Fig. iv) and the Inner Lid
Outer Gasket (see Fig. ii-b).
3. Clean the Inner Lid Rubber Gaskets after each use. Inspect the
Inner Lid Rubber Gaskets to ensure that they are clear of debris.
4. Place the new or clean Inner Lid Center Gasket in the hole
in the Inner Lid (see Fig. v). Attach the new or clean Inner Lid
Outer Gasket to the outside of the Inner Lid. When properly
attached, the Inner Lid Rubber Gaskets should sit evenly.
5. Ensure that the Knob on the Inner Lid is facing outward, away
from the Lid. You should be able to see the Knob (see Fig. ii-a).
6. Press the Inner Lid onto the Lid and press the hole on the Inner
Lid onto the Center Knob on the underside of the Lid (see Fig. iii).
7. Ensure that the Inner Lid is facing outward and that the Inner Lid
Rubber Gasket sits correctly and evenly on the Inner Lid.
16
6- & 8-Quart Emeril Lagasse Pressure AirFryer™ Plus
FIG. i
FIG. ii-a FIG. ii-b
FIG. iii
FIG. iv
FIG. v