Stihl HTA 66 Instruction Manual page 6

English
1 Chain Scabbard
Covers the guide bar and saw chain to reduce the risk of
injury from inadvertent contact during transportation and
storage.
2 Front Handle
Handle for the operator's front hand.
3 Drive Tube
Pole pruner shaft.
4 Oil Filler Cap
For closing the oil tank.
5 Battery Compartment
Holds the battery.
6 Control Handle
Handle for the operator's rear hand.
7 Ergo-Lever
Holds the retaining latch in the unlocked position.
8 Retaining Latch
Locks/unlocks the trigger switch.
9 Carrying Ring
For connecting a harness to the pole pruner.
10 Trigger Switch
Switches the motor on and off.
11 Locking Levers
Secure the battery in the battery compartment.
12 Chain Sprocket
Drives the saw chain.
13 Side Chain Tensioner
Permits precise adjustment of saw chain tension.
14 Guide Bar
Supports and guides the saw chain.
15 Saw Chain
Toothed cutting tool consisting of cutters, tie straps and
drive links.
4
16 Hook
Helps hold the pole pruner steady against the branch
during cutting.
17 Chain Sprocket Cover
Covers the chain sprocket.
18 Nut
Tightens the chain sprocket cover.
19 Battery LEDs
Indicate the battery's state of charge and display error
messages regarding potential malfunctions in the battery
or power tool.
20 Battery
Supplies electrical power to the motor.
21 Push Button
Activates the battery's LEDs.
# Rating Plate
Contains electrical information and the product's serial
number.
3 Main Parts
0458-191-8221-A