Advertisement
INSTALLATION INSTRUCTIONS
2.Install the wall plate
● Use an impact drill with a φ9 mm masonry bit to drill 40mm deep holes in
the wall in the locations of the wall plate holes as shown in Fig.1.
● Fit the expansion plugs into the holes.
● Secure the wall plate to the wall using the mounting screws.
3.Install the decorative cover holder (if inner decorative cover extension
is to be used)
● Use an impact drill with a φ9 mm masonry bit to drill 40mm deep holes in the
wall in the locationgs of the decorative cover holes as shown in Fig. 2.
● Fit the expansion plugs into the holes.
● Secure the decorative cover holder to the wall using the mounting screws.
wall
hole
expension
plug
wall plate
wall
hole
wall plate
3x40mm
screw
Fig. 1
2x40mm
screw
6
Fig. 2
Advertisement
