15-4.Installing The Unit - Mitsubishi Electric City Multi PWFY-P36NMU-E-BU Data Book

15. INSTALLATION
15-4. Installing the unit
15-4-1. Lifting method
Be very careful when carrying the product.
- Do not have only one person to carry product if it is more than 45 lbs (20 kg).
- Do not tilt the unit while transporting.
- PP bands are used to pack some products. Do not use them as a mean for transportation because they are dangerous.
- Tear plastic packaging bag and scrap it so that children cannot play with it. Otherwise plastic packaging bag may
suffocate children to death.
Product net weight
Model
Net weight
15-4-2. Installation method
Using the anchoring holes shown below, firmly bolt the unit to the base.
▪ PWFY unit
525 (20-11/16)
500 (19-11/16)
450 (17-23/32)
(B)
(A) 2 × 2-ø14 (9/16) (Anchoring hole)
(B) (Top view)
Bases
 Be sure to install unit in a place strong enough to withstand its weight. If the base is unstable, reinforce with a concrete
base.
 The unit must be anchored on a level surface. Use a level to check after installation.
 If the unit is installed near a room where noise is a problem, using an anti-vibration stand on the base of the unit is
recommended.
MEES20K028
PWFY-P36NMU-E-BU PWFY-P36NMU-E2-AU
131 lbs (59 kg)
unit: mm (in)
(A)
PWFY-P72NMU-E2-AU
73 lbs (33 kg)
AIR TO WATER
80 lbs (36 kg)
53