Table of Contents
Advertisement
20 EVEP611, EVEP614
USING THE APPLIANCE
Additional Functionality
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1.
Press the
button, the display will flash.
2. Set the countdown time you want by using
–
. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the
adjusting using the
the last change the timer will stop flashing, confirming
the timer has been set.
3. To cancel the timer press the
will flash. Then press and hold
the timer is cleared.
4. To stop the beeper, press any button.
Note: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer press and hold both the
buttons until the timer is reset.
Displaying the cavity temperature
During operation of the oven the current oven
temperature during pre-heating of the oven can be
displayed by pressing the TEMP button. During normal
operation the set temperature can be reviewed by
pressing the TEMP button.
Note: this temperature will only be displayed for
approximately 5 seconds.
Light operation
During operation of the oven the light can be switched off
by pressing and holding the
off. Also the light can be turned on from the standby
state by pressing and holding the
comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened
1.
Switch off the appliance using the function selector
switch.
2. Press and hold the TIME and
time until the word 'SAFE' is displayed and a double
beep is sounded. The word safe will be replaced by a
padlock symbol on the display after 5 seconds.
+
button again and
+
–
or
buttons. 5 seconds after
button, the display
+
–
and
buttons until
+
and
button until the light turns
button until the light
+
buttons at the same
Releasing the child-proof lock
Press and hold the TIME and
same time until a double beep is sounded. This will
commence to unlock the door and after 5 seconds the
oven is ready for use.
and
Switching the clock display ON and OFF
1.
Press together
the display.
2. Press together
clock display 'on' again.
3. When the display is set to the 'off' state pressing the
+
and
seconds then turn off the display.
4. When the display is set to the 'off' state, turning on the
oven will turn the display 'on' for the duration of oven
operation. Once the function is turned 'off' the display
will turn off after 5 seconds.
Note: if a timer mode is set or the oven is operating,
then it is not possible to switch the display off.
Safety Cut-out feature
–
The oven automatically switches itself off if the temperature
is not adjusted or the appliance is left operating after a
period of time. The oven switches itself off after:
•
12.5 hours when the temperature is set less
than 120°C.
•
8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
•
5.5 hours when the temperature is set to 200°C
or above, and below 250°C
•
3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (eg in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text 'DEMO' will be lit. The following
instructions show how to enter and exit 'Demo' mode.
1.
Ensure the oven is in the off state. Press and hold the
+
button until a beep sounds. The 'Demo' text will
begin to flash.
2. While holding the
to the first oven function until another beep is heard.
3. Then turn the function selector to the 'off' position.
4. Release the
5. Toggle and hold the temperature selector to the right
+
(
) until 3 beeps sound.
+
buttons at the
+
–
and
for 2 seconds to switch 'off'
+
–
and
for 2 seconds to switch the
–
button momentarily will display the time for 5
+
button turn the function selector
+
button.
Advertisement
Table of Contents
