Introduction; Product Outline; Configuration - Sharp AR-FN7 Service Manual

[1] INTRODUCTION

1. Product outline

This unit is installed to the following machines to perform the after-process of output paper from a printer, a copier, or a fax machine.
1) Employment of the through-type stapler
Employment of the through-type stapler allows to make saddle stitch by one stapler.
2) 3 kinds of auto staple functions
There are 3 staple positions available. (One position in the front, one position at the back, 2 positions at the center)
3) Saddle stitch function
Up to 10 sheets of paper can be stapled at the center and folded in half and discharged.
4) Punch function (Option)
By installation of a puncher unit, paper can be punched to make holes for a binder. (Applicable for 64 - 128g/m². OHP films cannot be used.)
Applicable models AR-P350 / P450, AR-M350 / M450

2. Configuration

1. Before installation of this unit, the large-capacity desk (AR-D13) or the 3-stage desk (AR-D14) must be installed in advance.
(When installing the AR-D13/D14, the option power unit (AR-DC1) is required.)
2. When installing this unit, the duplex module (AR-DU3) must be installed together.
3. This unit cannot be installed with the following units:
•Duplex module (AR-DU4) with the manual paper feed tray
•Paper exit tray (AR-TE4)
•Multi-purpose tray (AR-MU1)
•Finisher (AR-FN6)
Exit tray
(AR-TE3 or AR-DU4 Standard)
Simultaneous
installation
not allowed
Duplex
module/bypass
tray(AR-DU4)
Duplex module
Simultaneous
installation is required
Saddle stitch
finisher
(AR-FN7)
Stand/3 x 500 sheet
paper drawer
(AR-D14)
Output units
Saddle stitch finisher
Punch unit
= Must be installed together.
B/W scanner module/DSPF(AR-EF1)
(AR-DU3)
Simultaneous installation not allowed
AR-FN7
AR-PN1
*1
=Any of the units must be installed together.
AR-FN7/PN1 INTRODUCTION 1-1
Simultaneous installation not allowed
Upper exit tray
extension
(AR-TE4)
Multi purpose drawer
(AR-MU1)
Power supply unit
(AR-DC1)
Simultaneous installation is required
*1
*1
Finisher
(AR-FN6)
Mail-bin stacker
(AR-MS1)
Stand/MPD & 2000 sheet
paper drawer
(AR-D13)
= Cannot be installed together.