Sharp AR-FN7 Service Manual page 33

3) Remove the screw [4], and detach the processing tray rear cover [5];
then, detach the upper cover.
[5]
Fig.F03-101-08
(5)Removing the Processing Tray Upper Cover
1) Remove the front cover. (See 1.A.(2).)
2) Remove the rear cover. (See 1.A.(3).)
3) Remove the upper cover. (See 1.A.(4).)
4) Disconnect the connector [1], and remove the screw [2].
[1]
Fig.F03-101-09
5) While lifting the processing tray upper cover [3], disconnect the
connector [4]; then, detach the processing tray upper cover [3].
Fig.F03-101-10
[6]
[4]
[2]
[3]
[4]
AR-FN7/PN1 DISASSEMBLY AND ASSEMBLY 5-2
(6)Removing the Upper Right Cover Assembly
1) Remove the front cover. (See 1.A.(2).)
2) Remove the rear cover. (See 1.A.(3).)
3) Remove the two screws [1] at the front and the two screws [2] at the
rear; then, detach the upper right cover assembly [3].
[1]
Fig.F03-101-11
[3]
Fig.F03-101-12
(7)Removing the Saddle Guide
1) Remove the delivery tray. (See 1.A.(1).)
2) Remove the front cover. (See 1.A.(2).)
3) Remove the rear cover. (See 1.A.(3).)
4) Free the delivery tray support plate (front) [1] and the delivery tray
support plate (rear) [2] to the outside from the rail grooves.
5) Remove the four screws [3].
[3]
[2]
[3]
Fig.F03-101-13
6) Shift the side guide [4] lightly to the front, and free the engagement
of the paper surface detecting lever (rear) [5]; then, detach the side
guide [4].
[5]
Fig.F03-101-14
[3]
[2]
[3]
[1]
[3]
[4]