Charger Setup - Team Orion Advantage One Duo Instruction Manual

Hide thumbs Also See for Advantage One Duo:
Table of Contents

Advertisement

Available languages

Available languages

CHARGE OUTPUT SELECTION
The charger has two independent charge outputs (chan-
nels), n.1 on the left and n.2 on the right. You need to
adjust the settings of each channel independently. Change
channel by pressing the CHANNEL key, the actual channel
(1 or 2) is indicated at the top right corner of the LCD.

CHARGER SETUP

WARNING! Always identify the battery type and
a
make sure that it is compatible with the charger! Al-
ways use charge settings, which are compatible with
your battery! Always make sure you are adjusting
the charge settings for the correct channel! Failure
to use appropriate charge settings or attempting to
charge an incompatible battery could result in fire,
property damage or injury!
You must use and setup the charger according to the
battery manufacturer's recommendations; make sure that
you properly identify the battery type and specifications
(usually indicated on the battery label). The charger can
charge NiCd/NiMH batteries from 1 to 10 cells and LiPo/
LiFe batteries with 2 to 4 cells.
You must adjust the settings of each charge channel se-
parately, make sure you are adjusting the proper channel
(1 or 2).
www.teamorion.com
Modifying the charge settings
To modify the charge settings, press the ENTER key to
enter the setup mode and select the different parameters
(adjustable parameters will flash when selected).
Use the + and – keys to change the value of the parameter.
You can exit the setup mode by pressing the SET/MODE
key.
Settings memory
The charger has 10 memory slots for saving charge set-
tings. The settings are automatically loaded as you cycle
through the memory slots and automatically saved to the
current memory slot as you modify them. Memory slots 1
to 5 are only for LiPo/LiFe batteries settings and 6 to 10
are only for NiMH/NiCd batteries settings.
Battery type
WARNING! Selecting the wrong battery type can
a
result in fire, property damage or injury!
The charger can charge NiMH, NiCd, LiPo and LiFe
batteries. Select the correct battery type for the battery
you wish to charge.
The different battery types use specific charging methods;
make sure you select the correct battery type to avoid
accidents.
English - 15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents