Main/Charge Screen; How To Use; Charger Setup - Team Orion Advantage One Instruction Manual

 Works with AC or DC power sources
 Up to 6A charge current
 Integrated balancer w/JST-XH balance ports
 Charges NiCd/NiMH batteries up to 8 cells
 Charges LiPo/LiFe batteries with 2 to 4 cells
MAIN SCREEN
Memory slot Battery type Function mode Cell number
M01 LiPo
5000mAh
Battery capacity mAh Charge current
CHARGE SCREEN
Function mode Charge time Charged capacity mAh
CHG 12:59
LP 4.97A
Battery type Actual current Battery voltage
4 - English
CHG 2S
C=5.0A
1055
8.037V

HOW TO USE

Connect the charger to a stable and grounded power
source, either 100-240VAC mains power outlet or a 12VDC
power supply. An unstable power source may cause the
charger to malfunction and create hazardous conditions.
The charger has an integrated 120 minutes safety timer.
If you are charging a very high capacity battery, you may
need to restart the charge for the battery to become fully
charged.

CHARGER SETUP

Before charging your battery, you must setup the charger
according to the battery manufacturer's recommendation;
make sure that you properly identify the battery type and
specifications.
 Modifying the settings
To modify the settings, press the ENTER key to enter the
setup mode and select the different parameters and then
use the + and – key to change the value of the parameter.
You can exit the setup mode by pressing the SET/MODE
key.
 Settings memory
The charger has 10 memory slots where your charge
settings are automatically saved.
Team Orion Advantage ONE 406