Power Supply - Team Orion Advantage One Duo Instruction Manual

LCD SCREEN DATA DISPLAY
SETUP SCREEN
Memory Battery
slot type
M01 LIPO
5000mAh
Battery capacity
CHARGE SCREEN
Function Charge
mode time
CHG 12:59
LP 4.97A
Battery type Charge current
During the charge, by pressing the SET key you can
display extra information:
 Individual cell voltage (only for LiPo/LiFe)
 Input and output voltage (supply and battery voltage)
14 - English
Function Cell Channel
mode number number
CHG 2 1
C=5.0A
Charge current
Channel
Charged
number
capacity (mAh)
105 1
8.037V
Battery voltage

POWER SUPPLY

WARNING! Never connect the charger simulta-
a
neously to an AC and DC power source. Use only
a compatible and reliable power source. Never
connect the charger to AC power with the DC power
cord still connected to the charger. Do not leave
the charger without supervision while it is powered
on. Always disconnect the charger from the power
source when not in use. Power supply issues can
cause the charger to malfunction and cause fire,
damage to the product, to personal property and
cause serious injury.
The charger can be powered from an AC power source
such as mains power outlet or a DC power source such as
a car battery. Only use one type of power source at a time.
Connect the power cord to the charger before connecting it
to the power source. Depending on your local mains power
outlet type, you may need to purchase a compatible power
cord separately.
AC power source: connect the AC power cord to the
charger's AC power input connector and then into a 100-
240VAC power source such as a mains power outlet.
DC power source: plug the DC power cord into the DC
power XT60 connector. Connect the 4mm bullet connectors
to a 11-15VDC/12A min. power source. Respect polarities,
red is positive + and black is negative -. If necessary use
adapters to ensure a safe and reliable connection.
Team Orion Advantage ONE Duo