MA1110-EA
About this manual
E-2
About the face
E-4
Crown Operations
The crown can be pulled out to one of two (click) positions. Never apply undue force
when pulling out the crown.
Important!
In order to ensure full water resistance and to prevent damage due to impact, make
sure that the crown is normally full pushed in when using the watch.
When pulling out the crown, avoid using undue force, which creates the risk of
personal injury to your fi ngers and fi ngernails, and of watch malfunction.
First click
E-6
High-speed Forward and Reverse Movement
High-speed Cancel
E-8
Operation Guide 5198
Operations are performed using the watch's crown and the
A button.
Hand Functions
z Hour Hand
x Second Hand
c Minute Hand
v Home City Indicator
This User's Guide uses numbers shown above to identify
watch hands and indicators.
The following explains the meanings of the markings on
the watch's face.
1.
RC: Receive in progress
See "To perform manual receive" (page E-34).
2.
Current Home City
See "To confi gure Home City settings" (page E-40).
3.
AUTO-STD-DST: Standard time and daylight saving
time settings
See "To change the standard time/daylight saving
time setting" (page E-45).
4.
A (AM)/P (PM): AM and PM indications when setting
the time
See "To change the current time setting manually"
(page E-46).
For selecting a Home City
While the crown is pulled out, rotating it more than one full
turn either way will cause the hands or Home City indicator
to start to move at high speed. High-speed movement will
continue even if you release the crown.
Rotate the crown in the reverse direction of the movement
or press the A button.
Congratulations upon your selection of this CASIO watch.
Note that the product illustrations in this manual are intended for reference only, and so
the actual product may appear somewhat different than depicted by an illustration.
This watch does not have a city code that corresponds to the UTC offset of –3.5
hours. Because of this, the radio-controlled atomic timekeeping function will not
display the correct time for Newfoundland, Canada.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of this
product or its malfunction.
Important!
The A button is designed to protect against accidental
pressing. Use a thin pointed object to press the depression
of the button to operate it.
In the illustrations in this manual, the A button is
emphasized for ease of understanding.
5.
Y (YES)/N (NO): Time calibration signal reception result
Y (YES): Successful
N (NO): Unsuccessful
See "To check the result of the latest receive operation" (page E-35).
Second click
For confi guring time and other settings
Note
When you push the crown back in from the fi rst click, the x Second Hand will
perform movement that indicates whether the watch's battery requires charging
before resuming regular timekeeping. See "Charging Guide" (page E-19).
Note
Leaving the crown pulled out for more than two minutes without performing any
operation will automatically cause the setting operation to become disabled. If this
happens, press the crown back in and then pull it out again to confi gure settings.
High-speed movement can be used when setting the current time and when
performing home position adjustment (page E-49).
ENGLISH
E-1
E-3
E-5
E-7
E-9