Safety Notes; Installation Instructions; Symbol Description - Hans Grohe Vivenis 250 75040 Series Instructions For Use/Assembly Instructions

Hide thumbs Also See for Vivenis 250 75040 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal
pressures.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The drain valve must only be used as intended. It is
not allowed to attach other objects to the drain
valve, for example a semi-pedestal.
• 75200XXX: If the instantaneous water heater
causes problems or if you wish to increase the water
flow, the EcoSmart
aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart
(flow limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!
Adjustment (see page 35)
To adjust the hot water limiter. Using a hot water limiter
in combination with a continuous flow water heater is
not recommended.
Dimensions (see page 38)
Flow diagram (see page 39)
Spare parts (see page 40)
XXX = Colors
000 = Chrome Plated
4
(flow limiter) located behind the
®
max. 1 MPa
0,1 - 0,5 MPa
(1 MPa = 10 bar = 147 PSI)
70°C / 4 min
Assembly (see page 32)
English
Special accessories (order as an extra)
Hansgrohe recommends not to use as drinking water
the first half liter of water drawn in the morning or after
a prolonged period of non-use.
®
1,6 MPa
max. 60°C
670 = Matt Black
700 = Matt White
• special tool #58085000 (see page 32)
• Installation putty (see page 33)
Cleaning (see page 37)
Operation (see page 36)
Test certificate (see page 39)

Advertisement

Table of Contents
loading

Table of Contents