Installation - Scott SMV100 Owner's Manual

Home audio system with 3 cd changer and digital am/fm receiver
Table of Contents

Advertisement

Installation

Installation
For shelf mounting, extend the
left and right flaps at the back of
the unit and place it on a strong
flat surface.
Note - Leave at least 6 inches
(15cm) above the unit for the
door to open without being
obstructed.
Finally, position the speakers to the left and right of the unit.
Connections
Connect the speakers to the red and black terminals on the back of the unit as
shown below. (Hold down red or black terminal flap, insert wire, release flap.)
TO RIGHT
SPEAKER
Optional: connect any additional equipment to the back panel sockets as
follows:
Plug your *playback equipment (eg. MiniDisc or cassette player) into the
AUX sockets.
Plug your recording equipment (eg. MiniDisc or cassette recorder) into
the LINE OUT sockets.
*Other examples of playback equipment may include your TV, video recorder
or satellite receiver, your computer or games console, or DVD/DAT player.
Always refer to the equipment manufacturer's instructions.
TO LEFT
SPEAKER
4

Advertisement

Table of Contents
loading

Table of Contents