Table of Contents
Advertisement
Playing all discs
1. Load the discs as shown earlier.
Note that discs will be played in order. If you don't want
to start with disc
or
3
(indicated at the left of the front panel display).
2. Press
to start play.
To select tracks or pause, stop, etc, use buttons
(see page 11).
For repeat and random play, see previous page.
Playing a programmed selection of tracks
You can program the unit to play a selection of tracks from the discs loaded.
(Up to 40 tracks can be programmed.)
Note you can abandon programming at any time by pressing
1. Load the disc(s).
Note - When you press PROG to start programming, the front panel
will display p - 0 1 - this means programmed track 1.
Note that TRACK 0 0 flashing next to P - 0 1 is telling you to enter the CD
and track number for programmed track 1.
2. Press PROG.
3. Press CD / SELECT to select disc
panel display).
1 ,
press CD / SELECT to select
2
1
or
2
or
13
CD operation
,
,
and
.
3
(on the front
Advertisement
Table of Contents
