CD operation
4. Press
or
tracks on the disc, press
5. Repeat steps 2, 3 and 4 for each programmed track. (Note that P - 0 1
advances to P - 0 2, P - 0 3 etc as you program each track.)
You can check your program by pressing PROG repeatedly.
As P - 0 1, P - 0 2 advances, check the displayed disc and track numbers.
(Note after the final track, the display flashes TRACK 0 0 ; pressing PROG
again will return to the first track.)
6. Finally, press
After the program has stopped, you may press
again.
To set the program to repeat continuously, press REPEAT so that REPEAT
is displayed. (To cancel repeat, press REPEAT so that REPEAT disappears.)
Note-You cannot set a program to random play.
to select the TRACK number on that disc. (To select all
or
to play the program.
14
so that TRACK AL is displayed).
to play the whole program