I-WXH 80 HIGH POWER AUDIO SYSTEM FOR iPod Instruction Manual...
Page 2
WARNING CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL A’LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS PRODUCTO LASER OE CLASE 1 AVOID EXPOSURE TO BEAM This product contains a low power laser device. Warning: Do not touch the lens. PRECAUTIONS Follow the advice below for safe and appropriate operations.
LCD display 10 11 1. AUX IN mode 16. kHz: Unit of MW radio frequency 2. INTRODUCTION 17. Mute function is on 3. RANDOM playback 18. POP in EQ presets 4. CD file 19. ROCK in EQ presets 5. WMA file 20.
Connecting the external audio device (e.g. MP3 player) Connect the external audio device, such as MP3 player, LINE OUT or headphone socket to the main unit AUX IN jacks with the AUX IN cable (supplied), illustrated on the diagram and also refer to the table below: AUX IN jacks EXTERNAL AUDIO DEVICE:...
BASIC OPERATIONS ON/ Standby mode After connecting the speaker cables and the power supply (refer to CONNECTIONS), the main unit Standby led indicator lights up. It is in standby mode and the clock time is displayed. Press the ON/STANDBY button to turn on the unit and press it again to go to Standby mode.
RADIO OPERATION Listen to the radio 1. Press ON/STANDBY button to turn on the unit. 2. Press SOURCE button to select “TUNER”. 3. Press /BAND button to select FM or MW. Note: Long press button 5 seconds to switch the frequency range between Europe and US.
CD / MP3 / WMA OPERATION Start playback 1. At ON mode, press SOURCE button to select “CD”. 2. Press OPEN/CLOSE button to open the CD tray. 3. Insert a disc with the label side facing up onto the CD tray. 4.
REPEAT playback Press REPEAT button repeatedly to select repeat playback mode: For CD files, press it once to repeat the current track and the symbol “ “ flashes. Press it twice to repeat all the tracks and the symbol “ ”...
Page 11
PLAYING iPod AND CHARGING INTERNAL iPod BATTERY REPEAT playback Install the iPod universal dock adapter 1. Select the iPod universal dock adaptor fitting to your iPod model, from the next table. The adapter No is marked at the back of the adapter. 2.
Watch video from iPod You can output the video, if available, in your iPod to external video device (e.g. TV), refer to “CONNECTIONS”. Operations are the same as “Listen to iPod ”. Your iPod video setting – TV OUT must be set to “ON”. Note: 1.
TROUBLESHOOTING GUIDE Problems Recommendations 1.1 press the ON/STANDBY button to go to standby mode and 1. The player or display press it again go turn on the unit. does not work properly 1.2 Reset by unplugging the AC power cord for few seconds and re-plug it.
Need help?
Do you have a question about the I-WXH 80 and is the answer not in the manual?
Questions and answers