Table of Contents
Advertisement
To eject, simply open the CD door using
remove the disc. Note there's a cut-out to the left of
each player so that you can place your finger under
the edge of the disc to remove it.
Playing one disc
1. Load the disc as previously shown.
2. Press one of the three
buttons below the disc you wish
to play:
The number of the disc playing (
indicated at the left of the front panel display.
Selecting tracks
To change track while a disc is playing, press and release
Alternatively, you can pick a track number directly using buttons 1 to 9 on the
remote.
If the required track number is higher than 9, use the +10 button.
Examples: To select track 10 press +10 then 0.
To select track 23 press +10 twice then 3.
and
(Alternatively, press one of the
CD buttons on the remote.)
1
or
2
or
3
) is
11
CD operation
or
.
Advertisement
Table of Contents
