Electrolux Master 9 Manual page 13

ITEM SYMPTOM
The motor stalls
2
during operation
Grinder jar
3
leakage
www.electrolux.com
CAUSE
The jug and lid should be
always mounted during
operation
The jug or lid is
removed during
Mount and place jug and
operation.
lid correctly on appliance
to continue usage
If the motor stalls, turn off
the blender immediately,
unplug the appliance and
Overheat protection
let it cool for at least 10
minutes before plugging
back and turning on.
Cut all ingredients into
smaller pieces
Ingredients are too
large. Unplug for 10 seconds
and plug the machine to
continue use the machine
Usage of jug and
Incorrect use of accessories should match
jug/accessories or with correct ingredients.
Ingredients (Jug is used for blending
fruits and vegetables)
Stop timer is activated Press desired icons to
to prevent overheat continue usage
Turn glass jar clockwise
till tight on the blade
Removing grinder from
assembly holder before
appliance by turning
mounting on appliance
glass Jar instead of
the blade assembly
Turn ONLY the blade
holder anti-clockwise
assembly holder anti-
may loosen glass jar
clockwise to unmount from
and cause content to
appliance
leak out.
Do not turn glass jar to
unmount
SOLUTION INDICATION
The motor stops
running
a. All LEDs start
pulsing for 3 seconds
and then goes to
ON_IDLE.
B. The UI continues to
be in PAUSED state
The appliance turns
off and no LEDs
indicators are on
The appliance turns
off and no LEDs
indicators are on
The appliance turns
off and no LEDs
indicators are on
Appliance runs on
one speed, pulse or
program continuously
for 3 minutes and
stops
All LEDs (except
Wi-Fi) start pulsing for
3 seconds and then
goes to ON_IDLE
Content leaking out
of glass jar when
unmounting from
appliance
EN
CNS
CNT
KR
ID
TH
VN
13