Gastrodomus GAC700TN Installation, Use And Maintenance Manual page 26

1. INTRODUCTION
The refrigerated cabinets have been designed to meet the needs of our customers in terms of
aesthetics, design and components. The equipment is checked in every internal and external part
before sending. It is recommended to use the unit according to the instructions in the above manual.
2. HANDLING AND STORAGE
The refrigerated cabinet is contained in a package consisting of a wooden shelf, rigid corners,
polystyrene protections and plastic film. Before permanently placing the equipment, it is
recommended to store it in a covered environment with an ambient temperature between -25°C and
+55°C, with relative humidity between 30% and 95%.
3. COMMISSIONING
Read and store the labels on the refrigerated cabinet; do not cover them and if they are damaged,
replace them immediately. Do not remove guards or panels that require the use of tools to be removed.
3.1 POSITIONING
Before placing the equipment, make sure that the space dedicated to the refrigerator cabinet is correct
from the point of view of space requirements and is suitable for its proper operation and maintenance.
Place the appliance on a level surface, leveling it with the feet, then remove the packaging and the
protections provided by the company. Move the machine by lifting it only from the outer bottom to
prevent damage to the support feet or other equipment.
If the unit has been transported horizontally during handling, wait two hours before commissioning.
The appliance must not be installed in hazardous places, in the open air or exposed to rain; it must be
positioned far from heat sources and protected from the sun's rays and draughts. The air must be able
to circulate freely through the condensing unit.
25