Table of Contents
Advertisement
Installation
Connecting the CombiPLUS Wiring
Diverting valve
motor connection
A
Water Temperature
sensor connection
8
1
A
Pump connection
To remove,
push to
unlock
A
2
Flow sensor connection
CombiPLUS Kit for Vitodens 100-W, WB1B Quick Start
Connecting the CombiPLUS A wiring using
the supplied control and pump cables.
Q
1
Remove both standard knock-outs from the
rear right side of the CombiPLUS A.
Route the control cable Q through one
knock-out and the pump cable R through
R
the other.
Note: There are optional knock-outs on the
front left side of the CombiPLUS A
(if required).
Secure the cables inside the CombiPLUS A
using the locknuts provided.
2
Connect the electrical connectors in the
CombiPLUS A as shown.
Advertisement
Table of Contents
