Black & Decker WW100 Manual page 11

and the implementation of safety devices,
certain residual
risks can not be avoided. These include:
Injuries caused by touching any

rotating/moving parts.
Injuries caused when changing any

parts, blades or accessories.
Injuries caused by prolonged use

of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.

Health hazards caused by breathing

dust developed
when using your tool (example:-
working with wood, especially oak,
beech and MDF.).
Electrical safety
check that the mains voltage corresponds to the voltage on
the rating plate. Never attempt to replace the charger unit with
a regular mains plug.
#
Your charger is double insulated; therefore no
earth wire is required. Always check that the
mains voltage corresponds to the voltage on the
rating plate. Never attempt to replace the adapter
unit with a regular mains plug.
Symbols on Charger
Short circuit proof safety isolating transformer.
SMPS
$
The charging base is intended for indoor use
only.
+
Labels on appliance
Read all of this manual carefully before
using the appliance
LED Patterns Charging
LED Patterns In use
Battery diagnostics
If the appliance detects a weak battery, the charging indicator
Proceed as follows:
Plug in the charger. Switch on at the mains.

Leave the appliance to charge.

If the appliance detects a damaged battery, the charging
charge. Proceed as follows:
Take the appliance and the charger to be tested at an

authorised services centre.
Note: It may take as long as 60 minutes to determine that
the battery is defective. If the battery is too hot or too
cold, the LED will alternately blink, fast and slow, one
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection. z
Separate collection of used products and
packaging allows materials to be recycled and
used again. Re-use of recycled materials helps
prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
BLACK+DECKER provides a facility for the collection and re-
cycling of BLACK+DECKER products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
ENGLISH
Charging
Battery Fault
Battery low
Battery Empty
activated.
11
11