The following screen displays.
2.
In the Utility list, select Traceroute.
3.
Specify the following parameters for the traceroute utility:
•
Target. The IP address or host name of the computer you are tracing.
•
Max Hops. The maximum number of hops to allow when tracing the route.
•
Data Size. The size (in bytes) of the packet.
•
Base Port. The port number to send the packet to.
•
Resolve Host. Select On to resolve the host name to the IP address.
4.
Click the Start Test button.
The traceroute results display.
To clear the results from the display:
Click the Clear Results button.
DS Throughput Utility
To display the speed test for downstream traffic, run the DS throughput utility.
To run a DS throughput test:
1.
Select ADVANCED > Administration > Diagnostics.
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Administration
44