The following screen displays.
2.
In the Utility list, select Ping.
3.
Specify the following parameters for the ping utility.
•
Target. The IP address of the ping target computer.
•
Ping Size. The size (in bytes) of the ping packet.
•
No. of Pings. The number of times to ping the target computer.
•
Ping Interval. The time between pings.
4.
Click the Start Test button.
The ping results display.
To stop a ping test:
Click the Abort Test button.
To clear the results from the display:
Click the Clear Results button.
Traceroute Utility
To display the route and measure transit delays of packets across a network, run the
traceroute utility.
To run a traceroute test:
1.
Select ADVANCED > Administration > Diagnostics.
Wireless Cable Voice Gateway CG3700EMR-1CMNDS
Administration
43