Trinity TLS-0201C Owner's Manual page 5

ASSEMBLY INSTRUCTIONS
STEP 3
Use HEX KEY (F) to tighten HEX SCREW (D) for
each LEG (C) into TABLE TOP (A).
Turn HEX KEY (F) as far clockwise as possible,
take out HEX KEY (F), reposition, reinsert, and
turn as far clockwise as possible again until
HEX SCREW (D) is securely in place. Place
SCREW CAP (E) over each HEX SCREW (D).
Turn Table right-side up and adjust Feet
Levelers until Table is stable and level.
STEP 4
(TLS-0201C only)
Mobile Option
Unscrew Feet Leveler from each LEG (C). Screw
ADAPTER (I) onto each CASTER (G/H). Screw
CASTER (G/H) into each LEG (C). Make sure to
place (2) LOCKING CASTERS (H) on same side of
Table. Tighten as much as possible with WRENCH
(J).
Use provided caster wrench to tighten
completely. Failure to do as instructed could
result in caster stem breaking.
Stationary Option
Unscrew ADAPTER (I) with CASTER (G/H) from
each LEG (C). Screw in Feet Leveler into each
LEG (C). Lift Table right side up, and adjust Feet
Levelers until Table is stable and level.
© 2020 TRINITY - 800.985.5506
G (2)
J
FEET
LEVELER
D (4) E (4) F (1)
D
E
H (2) I (4) J (1)
G
I
4