Trinity TLS-0201C Owner's Manual page 4

ASSEMBLY INSTRUCTIONS
STEP 1
Lay TABLE TOP (A) upside-down on a smooth flat
surface. Insert LEGS (C) into round slots on bottom
of TABLE TOP (A). Make sure LEGS (C) are fully
inserted into TABLE TOP (A).
You will insert and tighten HEX SCREWS (D) in
Step 3.
STEP 2
Slide SHELF (B) over each LEG (C) to desired height.
Using provided HEX KEY (F), tighten HEX SCREW (D)
into SHELF (B).
Turn HEX KEY (F) as far clockwise as possible, take out
HEX KEY (F), reposition, reinsert, and turn as far
clockwise as possible again until HEX SCREW (D) is
securely in place. Place SCREW CAP (E) over each
HEX SCREW (D).
3
C
A
B
A (1)
B (1)
D (4) E (4)
D
© 2020 TRINITY - 800.985.5506
C (4)
F (1)
E