Installing an AP
● Installing the AP6510DN-AGN-US against a vertical pole:
1. Determine the AP installation position, slide the hoop
through the hole of the wall-mounting bracket and attach
it to the pole, And use the screwdriver to secure screws
on the hoop.
Field strength
场强示意
● The procedure for installing the AP6510DN-AGN-US against a horizontal pole is similar to the procedure for installing the
AP6510DN-AGN-US against a vertical pole.
上电调试
3
● Installing the Security Lock
NOTE
To prevent unauthorized personnel from moving the AP, lock the AP. The preceding figure shows the security lock. The
carrier should purchase the security lock and determine the position for installing the security lock.
2. Slide the AP that has the connector fastened into the wall-
mounting bracket.
Lock hole
5
Security
lock