Scandomestic SFS 242 W User Manual page 30

Unscrew and remove the
4
pin, turn the bracket over and replace
it.
5 Refit the bracket fitting the
hinge pin. Replace
6 Detach the Fridge and the Freezer door
bottom hinge
bottom
both adjustable feet.
gaskets and then attach them after ro-
tating.
7 Place the door back on. Ensure the
door is aligned horizontally and verti-
cally so that the seals are closed on all
sides before finally tightening the top
hinge.
8 Screw the 2 screws on the back.
With the door closed, check that the door
is aligned horizontally and vertically and
that the seals are closed on all sides before
finally tightening the bottom hinge. Re-
adjust the levelling feet as needed.