Table of Contents
Advertisement
other.
Q: How do I configure the settings when I use xDSL to link the router?
A: 1. PPPoE: Go to the GUI Internet > Basic Setting > Ethernet Setting. Change
Connection Type to PPPoE. Enter the Username and Password provided by
your ISP. Remember to connect your xDSL or Modem to the WAN Port on
your Router.
2. Static IP: Go to the GUI Internet > Basic Setting > Ethernet Setting. Change
Connection Type to Static IP. Enter the information in the blank provided by
your ISP. Remember to connect your xDSL or Modem to the WAN Port on
your Router.
Q: Can I prevent others from using my router?
A: Yes, there are some ways to prevent others from using your router.
1. Enable your WiFi client filter.
2. Disabled your SSID Broadcast.
3. Setting your WiFi security.
Q: My PIN code is enabled and where can I input the PIN code to use my Router?
A: Click the menu tabs Network Mobile Internet U/SIM PIN Management;
enter your PIN Code and click
Q: Why does my U/SIM status display "PIN Disable"?
A: Check that the SIM card (which is properly activated
your mobile internet service provider) is inserted correctly
your router.
.
Appendix A: FAQ
by
in
69
Advertisement
Table of Contents
