Table of Contents
Advertisement
Package Contents
Hardware Overview
1
SIM Card Slot
2
Power Switch
3
Signal Strength
LED/WPS/Reset
button
4
LAN PortPower
Receptor
5
RJ11LAN Port
6
Power Receptor
7
Network Status LED
8
Power LED
4
Insert SIM/USIM. Push‐push type.
Switch on/off the router.
Short press (1 second): Enable signal strength
indication.
Press for 3 seconds (< 10 seconds): Active WPS.
Long press (>10 seconds): Restore to factory default
settings.
Connect a LAN device as needed.Receptor for the
Power Adapter.
Connect a LAN device as needed.n analog phone.
Receptor for the Power Adapter.
(Blue) 4G LTE
(Green) 3G HSPA+/HSPA/UMTS/EVDO
(Pink/Purple) 2G EDGE/GPRS/GSM
(Red) No signal, SIM error, Service failure (no
IP) ; Flashing when firmware is being updated
Solid when power is on; / Signal Strength
Advertisement
Table of Contents
