Advanced Routing settings
Static Routing
This option allows fixed network routing path assignment (as opposed to the initial
adaptive routing).
To add a static network routing path, click
network routing path, click the corresponding
making any changes.
Interface:
Target:
IPv4‐Netmask:
Click
and choose 'lan' (local area network) or 'wan'
(wide area network).
Enter the target host IP or network address here.
Displays the IPv4‐Netmask address (the default is
255.255.255.255). A custom IPv4‐Netmask can also be
specified here.
Using Web-based Management
. To remove any unwanted static
button. Click
after
33