Table of Contents
Advertisement
Using Web-based Management
PIN Mode –
PIN Code:
Start:
44
(Note: To use this setup method, the client
must have a WPS button configured to PBC
Mode.)
Personal Identification Number Mode
(Note: To use this setup method, the client
must have a WPS button configured to PIN
Mode.)
After choosing PIN Mode, an additional text
box item "PIN Code" will appear.
This text box item appears when 'Mode' is set to "PIN Mode".
Enter the 8‐digit alphanumeric PIN in the text box. This PIN must
match the PIN of the router client.
If the PIN entered is invalid, the text color will become red with
on the right.
Whenever the PIN entered becomes valid, the text color will be
black without on the right.
After setting up WPS Mode (PBC or PIN), click the router client's
corresponding hardware/software WPS button (actual router
client hardware/software WPS button behavior will depend on
router client manufacturer's design).
Click
or press‐and‐hold the router's physical
SS/WPS/Reset button for just over 3 seconds to start the WPS
process.
Advertisement
Table of Contents
