Using Web-based Management
changes back to black without on the right (e.g.
4. Filter Source Port: Enter the source port number to be filtered.
5. Click
Filtering list.
In the status area, the message Unapplied Change may appear next to
"Operator Name" to indicate configuration changes stored in the router.
6. More rules can be added to the IP filtering list by repeating Steps 1‐5.
7. (a) To enable or disable an IP filtering list rule, click its check box under 'Enable'.
(b) To remove any Port Triggering rule, click its corresponding
8. To edit a particular IP filtering rule in detail, click its corresponding
button, and the rule's associated configuration page (more flexible and detailed
than express settings in Steps 1‐4) will appear. After making any changes, click
. Finally click
Note:
52
). When the IP address entered becomes valid, the text color
. The IP filtering rule you have just entered will be added to the IP
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
(a)
to exit this configuration page.
).
(b)
button.