Table of Contents
Advertisement
Appendix A: FAQ
Appendix A: FAQ
Q: What should I know and how long does it take when I upgrade the firmware of
router or modem?
A: 1. While upgrading the firmware requires some time to finish. During that, you
MUST NOT turn off the power or interrupt the progress.
2. You may use an Ethernet cable or a wireless connection to upgrade the
firmware. We suggest the use of an Ethernet cable.
3. It may take 2 minutes to upgrade the firmware of the router and 5 minutes to
upgrade the firmware of the modem.
4. When the firmware of the modem is upgrading, the UMTS LED will flash
among Blue‐Green‐Red. You should wait until the LED is in single color (about
4‐5 minutes).
Q: How do I connect to the router?
A: 1. Connect an Ethernet cable between PC/Notebook (NB) and the router.
2. Use WiFi to connect.
Q: What's the default "User name" and "Password" for the router?
A: User name: admin
Password: admin
Q: How do I enter GUI and setup the configuration for the router?
A: 1. Connect PC/NB to the router.
2. Open Internet Explorer or other Web browser.
3. Input "http://192.168.1.1".
4. Input User name and Password.
Q: Why can't I connect to the network via built‐in 3G module?
A: 1. Check the SIM/USIM to see if it is inserted well.
2. Check the UMTS LED on the router to see if it is solid.
3. Check the Status on GUI to see if the SIM/USIM detected well.
4. Check the Status on GUI to see if the APN it is correct.
5. Check the Internet on GUI to see if the Connection is "Keep Alive" or not.
Q: Why can't I link on the GUI?
A: If you have changed your WiFi security, SSID, Local IP address, you
have to repair your network to get a new IP that you can link the GUI.
XP:
If you are a WiFi user, click Network Connections and right click on
64
Advertisement
Table of Contents
