Crown CT63006 Manual Original page 8

Symbol
min
Power tool designation
Cordless vacuum cleaners are intended for domes-
tic, non-commercial use, e�g� in automobiles, homes,
schools, stores, offices. Power tools allow you vacu-
uming up non-harmful dry dust, fine debris, and vacu-
uming up small amounts of non-flammable liquids.
Power tool components
1 Dust-collecting container
2 Locking button
3 Ventilation slots
4 On / off switch with indicator
5 Socket for charger connector
6 Rubber nozzle *
Meaning
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number.
Read all safety regulations
and instructions�
Battery charging time�
Movement direction�
Locked�
Unlocked�
Prohibited�
Attention� Important�
Useful information�
Do not dispose of the power
tool in a domestic waste
container�
7 Crevice nozzle with brush (assembly) *
8 Charger *
9 Brush *
10 Brush lock button *
11 Crevice nozzle body *
12 Filter holder
13 Filter
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Crevice nozzle with brush (see fig. 1)
Press and hold the button 10, then move the brush 9 or
remove it as shown in fig. 1.
Installation / replacement of the nozzles (see fig. 2)
• Install the nozzles 6 or 7 into the intake opening of
the dust-collecting container 1, as shown in fig. 2.
• Disassembly operations do in reverse sequence�
Charging procedure of the power tool
battery
Initial operating of the power tool
The power tool is supplied with a partially charged
battery. Before the first use, the battery must be
fully charged.
Charging process (see fig. 3)
Never charge the battery when there is
liquid inside the dust-collecting contain-
er 1.
It is strictly forbidden to use the power
tool during charging.
• Connect the charger 8 to the mains�
• Insert the plug of the charger 8 into the socket 5
(see fig. 3). While charging, the indicator of the on / off
switch 4 flashes blue. As soon as charging is complete,
the indicator of the on / off switch 4 lights up blue�
• When charging is complete, remove the plug of the
charger 8 from the socket 5 and unplug the charger 8
from the mains�
It is normal for the power tool and charg-
er 8 to become hot while charging.
Switching the power tool on / off
Switching on:
Press and release the on / off switch 4, you will hear a
sound signal, the indicator of the on / off switch 4 lights
up red and the power tool turns on�
Switching off:
Press and release the on / off switch 4, the indicator
of the on / off switch 4 turns off and the power tool
switches off�
English
8