Table of Contents
Advertisement
Tether Use
23
For
Forward-Facing Mode
Your vehicle's features may be considerably different
than those pictured here.
You must always attach, adjust, and secure the tether (top
anchorage) strap when installing the car seat in the
Mode
with internal harness. Tethers improve the installation and
stability of car seats and reduce the risk of injury.
Attach the tether hook to the tether anchor designated by your vehicle
manufacturer for that seating position. Check your vehicle owner's
manual for more information.
If the seating position does not have a tether anchor, use a different
seating position or see your dealer or a qualified mechanic and have
one installed.
Using this child restraint without the tether strap
anchored as required by the manufacturer would be a
misuse of the child restraint and, in a sudden stop or crash,
could result in serious injury or death.
Do not fasten multiple tether hooks on the same tether
anchor in the vehicle.
Only
Tether Anchors
Forward-Facing
When installing in the
Mode, using the
Mode, or when the car seat is not
Strap
installed in a vehicle, attach the
tether hook to its storage attachment
Adjuster
on the back of the car seat as shown.
Gently tighten to remove slack.
Hook
Storage
Attachment
Tether Storage
and Parts
Pull Free End
of Belt to
To tighten: After the car seat is
Tighten
locked into place with the lower
anchor belt or vehicle belt, push
down on the car seat and gently pull
on the free end of the tether strap.
To loosen: Lift up on the tether
Lift Adjuster Up to
adjuster and push it towards the
Loosen
tether hook.
24
Storing Tether Strap
Rear-Facing
Booster Seat
Adjusting Tether Strap
Hide quick links:
Advertisement
Table of Contents
