STEP 7:
The Convert tents feature a removable vestibule. To attach, zip the end of the vestibule to the zipper track on the right side of the tent
door. Assemble blue pole and insert pole tip in grommets with blue webbing. Connect Tent Lite and Split Clips to pole. Stake out the
vestibule end/sides and your tent is completely set up.
Vestibule Zipper
Pole Tip/Grommet
CONVERT 2/3
USING YOUR TENT
GUYING OUT YOUR TENT:
Use the black Triangle Stopper to
adjust the length of the guy line.
Slide rings are used to triangulate
upper and lower guyouts.
WATERPROOF DOOR:
The Convert 2/3 tents feature a waterproof door so the
front vestibule can be left behind to save weight.
Your tent includes attached guylines and stakes. It is good practice to always guy out your tent, but is absolutely
necessary when it's windy.
Guy out your tent in the 8 locations shown below to prevent pole rotation/breakage during high winds.
Stake out the end of the
guy lines into the ground.
BREATHABLE BODY FABRIC:
The Convert 2/3 tents
feature breathable 20d polyester body fabric instead of
traditional mesh to keep the snow and dust out.
Breathable Body
Fabric
Split Clip
Tent Lite Hook
Need help?
Do you have a question about the CONVERT 2 and is the answer not in the manual?
Questions and answers