Sierra Designs HIGH SIDE 1/2 Pitching Instructions

HIGH SIDE 1/2
PITCHING INSTRUCTIONS
Congratulations on the purchase of your new Sierra Designs tent! In order to familiarize yourself with your new tent, we recommend you
"test pitch" it before embarking on your wilderness adventure.
PACKAGING INCLUDES: Tent body, rain fly, 2 poles, guy cords, stakes, storage bag, and pole bag with stake pocket.
STEP 1: Find an even piece of ground; be sure the area is clear of debris.
Lay out your tent as shown. Stake the 4 corners (circled).
STEP 3: Connect Tent Lite Hook to poles.
STEP 5: Wrap the 4 Velcro loops on the UNDERSIDE of the fly to the tent
poles to ensure proper fly tensioning. Then, clip the YELLOW/RED
SR buckles located on the rear corners of the tent.
4
1
2
STEP 2:
STEP 4:
Tent Lite Hook
STEP 6:
Velcro Loop
Attach fly cord loop around pole tips
3
SR Buckles
Pull down String Lock cord to tighten
Assemble poles. Locate YELLOW pole ends and insert into YELLOW SD
anchors/webbing. Long pole goes in FRONT, short pole in REAR.
SHORT POLE
LONG POLE
Lay the rain fly over the tent body matching the RED corner of the fly
with the RED corner of the tent.
Attach fly cord loop around pole tips (circled). Adjust tension by
pulling down on String Lock cord. Then, stake out side fly to improve
ventilation.
Insert Yellow pole in Yellow
SD Anchor/Webbing
Match RED corner of fly with
RED corner of tent body
Stake out here to improve ventilation.