Introduction; At&T Requirements - AT&T U-verse Manual

Hide thumbs Also See for U-verse:

Table of Contents

1 Introduction

The U-verse Enabled framework enables various internet devices to connect and

control U-verse Receivers through the home network. The user devices

connecting to the receivers are required to follow the U-verse Enabled pairing

process in order to properly connect to the receiver.

This document provides User Interface guidelines for the various devises to

initiate and maintain the connection to the U-verse Receivers.

1.1 AT&T Requirements

The guidelines in this document are meant to ensure that our customers are

seeing the same language consistently, especially when pairing a device to

receivers. As a developer you have near complete control when it comes to your

user-interface, however, the following AT&T requirements must be followed:



The set top box (receiver) must always be referred to as an AT&T U-verse

Receiver.



Applications should not alter the functions of standard remote control

commands.



All AT&T U-verse Enabled apps should provide a consistent method for

customers to manage devices and receivers. Developers must comply with

all requirements and steps as demonstrated in this document as well as the

AT&T U-verse ® Enabled Developer Guidelines. Developers may skin the

interface to match the overall application design, but should not change any

of the user flows or interactions. Minor content changes are allowed as long

as they do not violate any branding guidelines or change the user

interactions.

Page 1 of 16

Table of Contents