Advertisement
Fig.7
AA
DD
H2
Fig.10-1
F
DD
BB
Fig.7: Lift assembled roof (G1) up, fix connector (G1) and post (H2) with bolt (AA), flat washer (DD)
Repeat for all posts. (Fig8).
Fig.8: Finish covering small canopy (L1), install big canopy (M1) on the structure but do not fully cover (Fig.8)
Fig.9: Spread big canopy (M1) over the entire structure, and slide into each corner (Fig.9).
Fig.10-1/2: Connect one side of arc connector (J1) with pole (H2), and connect the other side with horizontal beam
1(E1) And horizontal beam 2 (F1), fasten by using bolt (BB) and flat washer (DD),and fasten with Velcro . (Fig.10
-1/2).
Step3
Country of Origin: China
Fig.8
G1
J1
H2
∙
L1
O
E1
DD
BB
Fig.11-1
Fig.11-2
N
H2
Fig.12
M1
O
Fig.10-2
J1
H2
BB DD
5 / 7
Fig.9
DD
BB
Advertisement
