Operation; Output Signals; Table 4: Output Signals - FGD FlameSpec IR3-HD User Manual

FlameSpec IR3-HD User Manual

5 Operation

The FlameSpec-IR3-HD is a triple-IR flame detector that includes a built-in high-definition video camera
module. The video module automatically records video of alarm events, and can provide live video of the
detection zone to a screen in the control room.
The detector is ready for detecting fire approximately 30 seconds after power up. During this startup time the
LED flashes Yellow. If the startup is successful, the indication LED turns to green, the 0-20mA indicates 4mA
and the fault relay is closed. The video module starts operating approximately 2 minutes after power up.
Detector configuration settings can be changed as described in section 3.
To restart the detector, turn off and then turn on the power.

5.1 Output Signals

The detector has the following output signals:
▪
Current output (0–20mA)
▪
Relays (Fault and Alarm)
▪
RS-485
▪
Tri-color LED
0 – 20mA
Fault Relay (NO)
Alarm Relay NO
LED
For more information & Technical support: (+1) 714-671-8500 · support@fg-detection.com
T
ABLE
Startup Fault
1mA 1mA
Open Open
Open Open
Flashing Flashing
Yellow Yellow
F101V0020.05
4: O S
UTPUT IGNALS
Dirty Window
2mA
Open
Open
Yellow
Normal Fire Alarm
4mA 20mA
Closed Closed
Open Closed
Green Red
18