Spirit XT685 Owner's Manual page 12

XT685 STEP ONE
12
HARDWARE FOR STEP 1
PART TYPE
100 BOLTS
124
CURVED WASHERS
123
BOLTS
FLAT WASHER
79
86 SPRING WASHER
1. Gather HARDWARE FOR STEP 1.
2. Slide the UPRIGHT COVERS (L 52, R 53) onto
the LEFT AND RIGHT UPRIGHTS (4, 5).
3. Slide the CONSOLE MAST SIDE CAPS (L 98,
R99) onto the LEFT AND RIGHT UPRIGHTS (4,
5) under the Upright Covers.
4. Connect the LOWER COMPUTER CABLE (33)
to the MIDDLE COMPUTER CABLE (32). Be sure
not to pinch the cable or damage may occur.
5. Insert the LEFT AND RIGHT UPRIGHTS into the
MAIN FRAME (1) and use the COMBINATION
WRENCH AND PHILLIPS SCREW DRIVER
(103) to secure 4 BOLTS (100) and 4 Curved
Washers (124) into place.
6. Use the L-SHAPED ALLEN WRENCH (104) to
tighten the LEFT AND RIGHT GUSSET (7, 8)
with 6 Bolts (123), 6 FLAT WASHERS (79), and 6
SPRING WASHERS (86).
DESCRIPTION QTY
5/16" X 3/4"
4
Ø8 X 23 X 1.5T
4
3/8" X 2-1/2"
6
Ø3/8" × Ø19 × 1.5T
6
Ø10 × 2.0T
6