Change The Source (Mode); Mute On/Off; Loudness On/Off; Preset Equalizer(Eq) - Pyle PLMRB29B User Manual

3. Press the or
4. Press the CLK button and the minutes will flash.
5. Press the or
6. Note: During Bluetooth mode, the clock can not be adjusted.

Change the Source (MODE)

Press the MODE button to switch between RADIO, BT(Bluetooth) , USB(with USB device inserted),
CARD(with SD card inserted) and AUX-IN(auxiliary input) modes.

Mute on/off

In power on mode, briefly press the MUTE button to toggle mute on or off. The muted state will be also
released when the volume knob is used.

Loudness on/off

Press the LOUD button on the remote control to turn on the loudness to reinforce the output of bass
frequencies, press again to turn it off.

Preset Equalizer(EQ)

Press the EQ button on the remote control to toggle between EQ OFF, FLAT, POP, ROCK, CLASS.

USB port

The USB port of this car radio is designed for media playback from flash memory devices and charging for
iPhone / andriod mobile phone. The charging current consumption is 1 ampere.

Built-in Microphone

To receive your voice when you calling by using this Bluetooth hands-free system.

Aux input connector

The 3.5mm auxiliary input stereo connection is designed for devices with 3.5mm line-out or headphone
output.

Reset System (RESET)

The RESET button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or when any of
the controls are disabled. Use a thin object with a pointed end to depress the RESET button.
button on the front panel or on the remote control to adjust the hour.
button on the front panel or on the remote control to adjust the minute.
- 7 -