Adobe 65021048 User Manual page 336

• Samples the average of all RGB color values, premultiplied with the alpha channel.
All Premultiplied
• Samples the average of all RGB color and alpha channel values. The result is that the sampled
Including Alpha
color also contains the average transparency of the sampled pixels.
When selected, the effect maintains the original clip's alpha channel. If you choose
Maintain Original Alpha
Including Alpha from the Average Pixel Color menu, the original alpha is stenciled over the sampled color.
The effect's transparency. The result of the effect is blended with the original image, with the
Blend With Original
effect result composited on top. The higher you set this value, the less the effect affects the clip. For example, if you
set this value to 100%, the effect has no visible result on the clip; if you set this value to 0%, the original image doesn't
show through.
Grid effect
Use the Grid effect to create a customizable grid. Render this grid in a color matte or as a mask in the alpha channel
of the source clip. This effect is good for generating design elements and mattes within which other effects can be
applied.
Original image (left) and with variations of effect applied (center and right)
The point of origin of the grid pattern. Moving this point offsets the pattern.
Anchor
How the dimensions of the rectangles are determined:
Size From
•
Each rectangle's dimensions are those of the rectangle with opposite corners defined by the Anchor
Corner Point
and Corner points.
•
A rectangle's height and width are equal to the Width value, meaning the rectangles are squares.
Width Slider
•
A rectangle's height is equal to the Height value. A rectangle's width is equal to the Width
Width & Height Sliders
value.
The thickness of the grid lines. A value of 0 causes the grid to disappear.
Border
Note: The anti-aliasing of the grid borders may cause the visible thickness to vary.
The softness of the grid.
Feather
Inverts the transparent and opaque areas of the grid.
Invert Grid
The color of the grid.
Color
The opacity of the grid.
Opacity
The blending mode to use to composite the grid on top of the original clip. The default None mode
Blending Mode
renders the grid only.
Lens Flare effect
The Lens Flare effect simulates the refraction caused by shining a bright light into the camera lens.
Specifies a location for the center of the flare.
Flare Center
April 1, 2008
ADOBE PREMIERE PRO CS3 330
User Guide