Adobe 65021048 User Manual page 218

A send can be applied pre-fader or post-fader, and the outcome is that the track audio is sent either before or after
the track's volume fader is applied. With a pre-fader send, adjusting the track fader doesn't affect the output level
from the send. A post-fader send maintains the wet/dry ratio, fading the wet and dry signals simultaneously as you
adjust the send track's volume.
See also
"Routing track output" on page 214
Send a track to a submix
(Optional) To display the Effects And Sends panel in the Audio Mixer, click the Show/Hide Effects And Sends
1
triangle at the left side of the Audio Mixer.
2 In the Effects And Sends panel, do one of the following:
• To send to an existing submix, click a Send Assignment Selection triangle and choose a submix name from the
pop-up menu.
•
To create and send a new submix, click a Send Assignment Selection triangle and choose one of the following:
Create Mono Submix, Create Stereo Submix, or Create 5.1 Submix.
A
B
C
D
Sends
A. Name of submix assigned to send, and Send Assignment pop-up menu B. Send mute C. Control knob for selected send property D. Send
Properties pop-up menu
Edit Send settings
(Optional) To display the Effects And Sends panel in the Audio Mixer, click the Show/Hide Effects And Sends
1
triangle at the left of the Audio Mixer.
2 In the Effects And Sends panel, click the Send Assignment Selection triangle and choose a send from the pop-up menu.
(Optional) Choose the send property you want to edit from the Selected Parameter menu below the selected send
3
property control.
April 1, 2008
ADOBE PREMIERE PRO CS3 212
User Guide