Advanced Mixing - Adobe 65021048 User Manual

For best results monitoring pan or balance settings, make sure that each of the computer or audio card's outputs is
connected to the correct speaker, and make sure that positive and negative wires are connected consistently across
all speakers.
See also
"Working with keyframes" on page 282
Pan or balance a stereo track
❖
In the Audio Mixer, do one of the following:
•
Drag the pan control knob or the value below the knob.
• Click the value below the pan control knob, type a new value, and press Enter (Windows) or Return (Mac OS).
Pan or balance a 5.1 surround track
1 In the Audio Mixer, click and drag the puck anywhere within the tray. To snap the puck to a left, right, or center
channel, drag the puck to a pocket along the edge of the tray.
Adjust the center channel percentage by dragging the center percentage knob.
2
3 If needed, adjust the LFE (subwoofer) channel level by dragging the knob above the Bass Clef icon
Pan or balance a track in the Timeline panel
In the Timeline panel, if necessary, expand a track's view by clicking the triangle next to the track name.
1
2 Click the Show Keyframes button
Click Track:Volume at the top left of the track and then choose Panner > Balance or Panner > Pan from the
3
pop-up menu. (For 5.1 surround audio, choose the dimension you want to edit from the Panner menu.)
4 (Optional) If you want to adjust the pan or balance effect over time, move the current-time indicator and click
the Add/Remove Keyframe icon
5 Use the Selection tool or the Pen tool to adjust the level.
(Optional) If you're adjusting the pan or balance effect over time, repeat steps 4 and 5 as necessary.
6
See also
"Working with keyframes" on page 282

Advanced mixing

Work with submixes
A submix is a track that combines audio signals routed to it from specific audio tracks or track sends in the same
sequence. A submix is an intermediate step between audio tracks and the master track. Submixes are useful if you
want to work with a number of audio tracks in the same way. For example, you can use a submix to apply identical
audio and effect settings to three tracks of a five-track sequence. Submixes can help make the best use of your
computer's processing power by allowing you to apply one instance of an effect instead of multiple instances.
, and choose Show Track Keyframes from the pop-up menu.
.
April 1, 2008
ADOBE PREMIERE PRO CS3 210
User Guide
.