Proprietary Note; Documentation Overview; Trademarks; Related Publications - PEP Modular Computers CP345 Manual

Quad high-speed serial controller board

Table of Contents

CP345

Preface

Proprietary Note

This document contains information proprietary to PEP Modular Computers . It may not be

copied or transmitted by any means, disclosed to others or stored in any retrieval system or

media, without the prior written consent of PEP Modular Computers GmbH or one of its autho-

rized agents.

The information contained in this document is, to the best of our knowledge, entirely correct.

However, PEP Modular Computers cannot accept liability for any inaccuracies, or the conse-

quences thereof, nor for any liability arising from the use or application of any circuit, product,

or example shown in this document.

PEP Modular Computers reserve the right to change, modify, or improve this document or the

product described herein, as seen fit by PEP Modular Computers without further notice.

This manual has been written for OEM software and hardware engineers to correctly under-

stand the features and specifics of the product described in it. The manual is intended also for

professional training purposes.

PEP Modular Computers GmbH , the PEP logo and, if occurring in this manual, "CXM" are

trademarks owned by PEP Modular Computers GmbH , Kaufbeuren (Germany).

In addition, this document may include other names, company logos and trademarks, which

are registered trademarks and, therefore, proprietary to their respective owners.

For any details not described in the product documentation of the CP345 serial controller

board, please refer to the following publications.

• PICMG CompactPCI Specification, V. 2.0, Rev. 3.0

• PCI Special Interest Group: PCI Local Bus Specification, V. 2.1 of 1 June 95

• PEP Modular Computers GmbH: CompactPCI System Manual, ID 19954

ID 19979, Rev. 03

Page v

Table of Contents

Do you have a question about the CP345 and is the answer not in the manual?